Find your city

Type your city or ZIP code to see the best-rated septic service companies near you.

Get free quotes

Septic Tank Services in Maryland

The best-rated septic service companies across Maryland, plus state laws, permits and costs.

Finding a reliable septic tank Maryland provider starts with knowing the rules and what work should cost. This guide covers top-rated companies, the state septic laws that apply to your property, permit and license requirements, and typical prices compared with national averages. Use it to shortlist contractors and ask the right questions before any work begins.

43 cities58 companiesavg. 4.9★

Top 10 septic service companies in Maryland

Below are some of the best-reviewed septic companies across Maryland, drawn from customer ratings. Ratings are high across the board, so compare service areas, review counts and the specific work you need.

Show map

Jet Septic and Plumbing Services

5.0 (329) Eldersburg, MD 24/7

Customers appreciate the quick scheduling, round-the-clock availability, and a crew that goes beyond the basic pump-out, such as clearing a backed-up line. Several reviewers describe the team as friendly and down to earth, though the reviews don't mention any real complaints.

  • 24-hour service
  • Family-owned
  • Quick scheduling

Services:PumpingService

Contact See reviews Best in Eldersburg →

A-1 Septic

4.9 (285) Baltimore, MD 24/7

Customers consistently describe this family-owned company as punctual, honest, and friendly, with office staff and drivers who explain the work clearly. Several have used them for many years and say they are reliable and fairly priced.

  • Family-owned
  • Punctual
  • Clear communication

Services:PumpingService

Contact See reviews Best in Baltimore →

John's Septic Service

5.0 (36) Bel Air North, MD 24/7

Customers describe a family-run business with decades of experience, known for responsive scheduling and respectful treatment of their property. Many clients have used the company for years and say it refers them elsewhere when it cannot help.

  • Family owned
  • Responsive
  • Fair pricing

Services:PumpingService

Contact See reviews Best in Bel Air North →

Elzey's Septic Service

4.9 (39) Salisbury, MD 24/7

Reviewers describe Elzey's as friendly, knowledgeable, and competitively priced, with quick scheduling and reliable emergency help, including late-night calls. Customers also value their proactive advice on preventive fixes and their work on non-traditional drainfield installs.

  • Emergency service
  • Preventive advice
  • Drainfield installs

Services:PumpingRepairInstallationReplacementMaintenanceDrain Field ServicesService

Contact See reviews Best in Salisbury →

Maryland Septic Tank Laws & Requirements

Maryland septic work is governed by a state agency and delegated county programs. Knowing which rules apply helps you avoid costly violations when you install, repair or sell a home with a septic system.

Who regulates it Maryland Department of the Environment (MDE), Onsite Systems Division, working with county health departments as the local Approving Authorities

MDE sets the statewide septic rules in COMAR 26.04.02. County health departments or other local approving authorities handle permits, site evaluations and inspections under delegated programs. Homeowners should also check county-specific rules, such as sale inspections, contractor licenses and fees, with their own county health department.

1

Maryland Septic Tank Laws

The Maryland Department of the Environment (MDE), through its Onsite Systems Division, sets the statewide septic rules in COMAR 26.04.02. County health departments or other local approving authorities handle permits, site evaluations and inspections under delegated programs. Homeowners should also check county-specific rules on sale inspections, contractor licenses and fees with their own county health department. Anyone performing on-site wastewater work must be registered with the State Board of On-Site Wastewater Professionals.

2

Maryland Septic Tank Requirements

Under COMAR 26.04.02.03, no one may build an on-site sewage disposal system, or alter one or increase its flow, without first getting a permit from the approving authority. Setback distances are strict: the system and its recovery area must be at least 100 feet from a water well in an unconfined aquifer and 50 feet from a well in a confined aquifer. Other setbacks cover springs, streams, drainage ways, steep slopes and building foundations, at distances set in COMAR 26.04.02.04.

3

Maryland Septic Code

The septic code also covers system design and the use of nitrogen-removing BAT units. Conventional systems can be installed outside the Critical Area for new construction, while BAT is required for large systems of 5,000 gallons per day or more, and the Anne Arundel County Health Department requires BAT for new and replacement systems in the Critical Area. Since July 1, 2012, MDE has collected an annual $60 Bay Restoration Fee from each user served by an onsite system to fund BAT upgrades.

Key rules at a glance (10), with official sources
TopicRuleSource
Who regulatesMDE's Onsite Systems Division gives technical direction to County Health Departments and Local Approving Authorities that run the delegated programs for onsite sewage disposal systems and wells.mde.maryland.gov
Permit required (state code)Under COMAR 26.04.02.03, no one may build an on-site sewage disposal system, or alter one or increase its flow, without first getting a permit from the Approving Authority.regs.maryland.gov
Statewide application portalAny owner who wants a septic system installed, or needs an existing system repaired, must get a Septic System Construction Permit, and the MDE online portal says a county land (soil) evaluation must be completed before applying.onestop.md.gov
Setback: wellsCOMAR 26.04.02.04J and 26.04.02.05B require the septic system and its recovery area to be at least 100 feet from a water well in an unconfined aquifer and 50 feet from a well in a confined aquifer.mdrules.elaws.us
Other setbacksCOMAR 26.04.02.04J also sets 100 feet from springs, 100 feet from non-potable water bodies including streams, 100 feet from karst sinkholes, 25 feet from drainage ways, flood plain soils, rock outcrops and steep slopes (>25%), and 10 feet from building foundations.mdrules.elaws.us
Local setback example (Howard County)Howard County's published setback sheet lists 100 feet from a well to the septic system if the well is not down-gradient and 200 feet if it is down-gradient, which needs Health and MDE variance approval, plus 10 feet from the septic tank to a house without a basement.howardcountymd.gov
Pumping and maintenanceCOMAR 26.04.02.03K requires each construction permit to state that MDE recommends pumping septic tanks, BAT and other pretreatment units often enough that solids do not reach the disposal area; I found no statewide mandatory pumping interval for conventional systems in the official sources.regs.maryland.gov
Nitrogen-removing (BAT) systemsMDE's 2016 rule change lets conventional systems be installed outside the Critical Area for new construction, while BAT is still required for large systems of 5,000 gallons per day or more; the Anne Arundel County Health Department says BAT is required for all new and replacement systems in the Critical Area.mde.maryland.gov
Bay Restoration FeeSince July 1, 2012, MDE has collected a $60 annual fee from each user served by an onsite system to fund BAT upgrades, with priority given to failing systems in Critical Areas.mde.maryland.gov
Property-sale inspectionMDE says anyone performing a property transfer inspection of an on-site septic system must be registered with the State Board of On-Site Wastewater Professionals; whether an inspection is required at sale varies by county, and unofficial real-estate sources list Anne Arundel, Baltimore, Carroll, Frederick, Harford and Queen Anne's counties as requiring one, so confirm with your county health department.mde.maryland.gov

Official sources:MDE - Onsite Systems (registration, training, transfer inspection guidance)MDE - Onsite Disposal Systems / BAT programCOMAR 26.04.02.03 - On-Site Sewage Disposal PermitsCOMAR 26.04.02.04 - Site Evaluation (separation distances)COMAR 26.04.02.05 - Design and Construction of Conventional SystemsMaryland Septic System Construction Permit (OneStop)

Rules change and some counties add their own. Check with your county health department before you start work.

Septic Tank permits and licenses in Maryland

A county-issued permit is required before building, altering or repairing a septic system, and a soil or percolation evaluation by the county comes first. The statewide online application asks for lot details, bedroom count, a site sketch and the contractor's name. Fees and timing vary by county: Kent County lists $150 to $500 and 1 to 120 days for processing, while Montgomery County permits are valid for 12 months with one 6-month extension. Ask your installer whether they handle the application and confirm the permit is in place before work starts.

How much does septic tank pumping cost in Maryland?

Septic costs in Maryland run close to national averages but are slightly higher. Pumping typically falls between $305 and $595 in the state, with an average of $450, compared with $290 to $565 nationally. Installation averages $7,870 in Maryland, ranging from $3,675 to $12,595, versus about $7,500 nationally. Drain field work averages $8,395 in the state against $8,000 nationally, and repairs average $1,940 compared with $1,850. Prices depend on tank size, access and soil conditions, so get written estimates before you commit.

ServiceIn MarylandNational
Septic Tank Pumping Cost $305 – $595 $290 – $565 +5%
Septic Tank Installation Cost $3,675 – $12,595 $3,500 – $12,000 +5%
Septic Tank Maintenance $315 – $525 $300 – $500 +5%
Septic Tank Inspection $210 – $945 $200 – $900 +5%
Septic Tank Replacement Cost $3,150 – $10,495 $3,000 – $10,000 +5%
Septic Tank Cost $305 – $595 $290 – $565 +5%
Septic Tank Cleaning Cost $315 – $735 $300 – $700 +5%
Septic Tank Repair Cost $680 – $3,150 $650 – $3,000 +5%
Drain Field $3,150 – $15,745 $3,000 – $15,000 +5%
Aerobic Septic System $210 – $630 $200 – $600 +5%

Typical ranges: national prices adjusted to the cost of living in Maryland (BEA regional price parities). Your quote depends on your property.

Use the cost calculator

Septic Tank services in Maryland: FAQ

Do I need a septic tank permit in Maryland?

Yes. Under COMAR 26.04.02.03, you need a permit from the county approving authority before you build, alter or repair a septic system. A soil evaluation is normally done first, and the statewide online application is used in many counties.

Do I need a septic license in Maryland to do the work?

Anyone doing on-site wastewater work in Maryland must register with the State Board of On-Site Wastewater Professionals, which covers design, installation, pumping, repair and property-transfer inspection. Some counties add their own licensing, so check with your county health department.

Is a septic inspection required when I sell a home in Maryland?

It depends on the county. MDE requires that anyone performing a property transfer inspection be registered with the State Board, but whether an inspection is required at sale varies by county. Confirm the requirement with your county health department before listing the property.

Get free quotes