Find your city

Type your city or ZIP code to see the best-rated septic service companies near you.

Get free quotes

Septic Tank Services in Alabama

The best-rated septic service companies across Alabama, plus state laws, permits and costs.

Looking for septic tank services in Alabama? This guide covers well-reviewed local companies, how state rules apply to permits and licensed work, and what septic tank pumping, installation and repair typically cost in the state compared with the national average.

21 cities72 companiesavg. 4.9★

Top 10 septic service companies in Alabama

The companies below have strong review records across the state. Compare their locations and review counts to find a provider near your property.

Show map

SFI Environmental

5.0 (82) Gadsden, AL 24/7

Customers consistently describe the team as professional, respectful, and quick to arrive, with same-day pumping and home-inspection work often mentioned. Many also appreciate honest advice about whether a repair is actually needed and tidy cleanup afterward.

  • Same-day service
  • Honest advice
  • Septic inspections

Services:PumpingInspectionReplacementService

Contact See reviews Best in Gadsden →

Alabama Septic Tank Laws & Requirements

Septic systems in Alabama are governed by state health rules and by licensing requirements for the people who install and pump them. Knowing who to contact before any work begins can save time and cost.

Who regulates it Alabama Department of Public Health (ADPH), Onsite Sewage Program, with county health departments. Installers and pumpers are licensed by the separate Alabama Onsite Wastewater Board (AOWB)

<cite index='12-2'>Alabama law requires homeowners and businesses not on a public sewer to get a permit from the local health department before installing a new system or repairing an existing one.</cite> <cite index='25-1'>State law requires septic tank installers and pumpers to hold an Alabama Onsite Wastewater Board license.</cite>

1

Alabama Septic Tank Laws

The Alabama Department of Public Health (ADPH) Onsite Sewage Program, working through county health departments, regulates septic systems under Chapter 420-3-1. The rules cover design, permitting, installation, approval and operation of onsite sewage systems. Homeowners and businesses not connected to a public sewer must follow these rules whenever they install or repair a system. Installers and pumpers are licensed separately by the Alabama Onsite Wastewater Board (AOWB).

2

Alabama Septic Tank Requirements

Before any new installation or repair, you need a Permit to Install (Repair) from your local health department. Work cannot begin until that permit is issued. The health department inspects the system before it is covered, and an Approval for Use must be issued before the building can be occupied. Concrete tanks must meet the current ASTM C1227 standard, and metal tanks are prohibited as sewage tanks.

3

Alabama Septic Code

The septic code sets specific technical limits. Pre-made tanks, grease traps and holding tanks need a permit for their tank series before they can be installed, using ADPH Form CEP-11. Engineered systems must be certified by the engineer, and the installer certifies the finished work on ADPH Form CEP-5 before approval. Abandoned tanks must be emptied and filled, and setback distances for drain fields and tanks are set in Table 4 of Rule 420-3-1-.65, which you should confirm with your county health department.

Key rules at a glance (15), with official sources
TopicRuleSource
Who regulates<cite index='1-1'>ADPH Chapter 420-3-1 (State Board of Health) sets requirements for the design, permitting, installation, approval and operation of onsite sewage systems.</cite>alabamapublichealth.gov
Permit before work<cite index='19-3'>Under rule 420-3-1-.06(1), no one may begin installing or repairing an onsite system or component until the responsible person has been issued a valid Permit to Install (Repair) by the local health department.</cite>alabamasepticguide.net
Inspection and Approval for Use<cite index='12-8,12-9'>The owner calls the health department before installation to schedule an inspection, and the health department issues an Approval for Use before the building can be occupied.</cite>alabamapublichealth.gov
Inspection at saleI found no official Alabama source requiring a septic inspection at property sale. One non-official real-estate source states that <cite index='14-4'>no Alabama law makes a seller inspect a septic tank before a sale</cite>, so confirm with the county health department.thewilliamsgroupal.com
System records<cite index='40-1,40-2'>Property owners or their agents (attorneys, real estate agents, septic repair companies, developers) can ask the local health department for septic tank information.</cite> <cite index='40-15'>The completed permit, called the Approval for Use, includes a diagram of the actual installation.</cite>alabamapublichealth.gov
Tank specifications<cite index='8-7'>Concrete tanks must be designed, constructed and tested to the current ASTM C1227 standard.</cite> <cite index='8-14'>Metal tanks, drums, barrels or pipes are prohibited as sewage tanks.</cite>admincode.legislature.state.al.us
Approved (pre-made) tanks<cite index='30-7'>No pre-made septic tank, grease trap or holding tank may be installed unless a permit has been issued for that tank series.</cite> <cite index='31-1'>ADPH Form CEP-11 is the application for that permit.</cite>admincode.legislature.state.al.us
Setbacks<cite index='38-1'>Minimum setbacks for drain fields, septic tanks, pump chambers and similar components are set out in Table 4 of Rule 420-3-1-.65.</cite> I could not retrieve the Table 4 figures from an official source. Secondary sites give conflicting distances, so none are reported here. Get the exact distances from your county health department.regulations.justia.com
Effluent line crossings<cite index='38-2'>An effluent line may cross a water line if 18 inches of vertical separation is kept, with the effluent line passing under the water line.</cite>regulations.justia.com
Pumping and maintenanceI found no mandatory pumping interval in the sources. <cite index='43-13'>ADPH recommends pumping the tank every three to five years to prevent sludge build-up.</cite> <cite index='41-8'>Pumpers must hold an AOWB license to pump tanks and dispose of the septage in an approved manner.</cite>alabamapublichealth.gov
Inspection frequency (recommended)<cite index='41-3'>ADPH's homesite guide says the tank should be inspected once every two to three years.</cite> <cite index='46-14'>Its maintenance brochure advises contacting a licensed contractor for service every 1-2 years.</cite> Neither is a legal requirement.alabamapublichealth.gov
Effluent filter<cite index='46-2'>ADPH advises having an effluent filter placed in the septic tank.</cite> <cite index='28-7'>The installer's certification checklist includes an NSF Standard 46 effluent filter.</cite>alabamapublichealth.gov
Flooding<cite index='43-9,43-11'>Do not open the tank for pumping while the soil is still saturated, because a tank pumped in saturated soil may pop out of the ground.</cite>alabamapublichealth.gov
Engineered systems and certifications<cite index='6-5'>For an engineered system, the engineer certifies the design by signing ADPH Form CEP-2 or CEP-3.</cite> <cite index='23-14'>Before the Approval for Use is issued, the installer certifies the installation on ADPH Form CEP-5.</cite>admincode.legislature.state.al.us
Abandonment<cite index='30-10'>Rule 420-3-1-.24 requires an abandoned tank to be emptied and filled with sand or similar material, and its bottom may be ruptured.</cite> The exact fill material is cut off in the excerpt, so check the rule text.admincode.legislature.state.al.us

Official sources:ADPH – Septic Tank SystemsADPH Rules, Chapter 420-3-1 Onsite Sewage Treatment and Disposal (PDF)Alabama Administrative Code, Chapter 420-3-1Alabama Administrative Code, Rule 420-3-1-.17 Tank specificationsAlabama Administrative Code, Rule 420-3-1-.34 CertificationsAlabama Administrative Code, Rule 420-3-1-.65 Setback and Separation Distances (Justia)

Rules change and some counties add their own. Check with your county health department before you start work.

Septic Tank permits and licenses in Alabama

Permits are handled at the county level. Apply to your county health department's environmental division with the application form prepared by the professional who evaluated the site, the fee, and two sets of the application and plot plan. An environmentalist reviews the application and soil test results, and the Permit to Install is issued once state regulations are met. Standard forms are listed on the ADPH forms page, such as CEP-2 for small-flow systems. Fees differ by county, so ask your local office for the current amount before you apply.

How much does septic tank pumping cost in Alabama?

In Alabama, septic tank pumping typically runs from $260 to $500, with an average near $380, while the national range is $290 to $565 with an average around $430. Installation is also lower in the state, averaging about $6,660 compared with $7,500 nationally. Replacement averages about $5,775 in Alabama versus $6,500 across the country. Drain field work and repairs follow the same pattern, so Alabama homeowners generally pay somewhat less than the national typical project cost.

ServiceIn AlabamaNational
Septic Tank Pumping Cost $260 – $500 $290 – $565 -12%
Septic Tank Installation Cost $3,110 – $10,660 $3,500 – $12,000 -11%
Septic Tank Maintenance $265 – $445 $300 – $500 -11%
Septic Tank Inspection $180 – $800 $200 – $900 -11%
Septic Tank Replacement Cost $2,665 – $8,880 $3,000 – $10,000 -11%
Septic Tank Cost $260 – $500 $290 – $565 -12%
Septic Tank Cleaning Cost $265 – $620 $300 – $700 -12%
Septic Tank Repair Cost $575 – $2,665 $650 – $3,000 -11%
Drain Field $2,665 – $13,325 $3,000 – $15,000 -11%
Aerobic Septic System $180 – $535 $200 – $600 -11%

Typical ranges: national prices adjusted to the cost of living in Alabama (BEA regional price parities). Your quote depends on your property.

Use the cost calculator

Septic Tank services in Alabama: FAQ

Do I need a septic tank permit in Alabama?

Yes. Homeowners and businesses not on a public sewer must get a Permit to Install (Repair) from the local county health department before installing a new system or repairing an existing one.

Do septic installers and pumpers need a license in Alabama?

Yes. Installers and pumpers must be licensed by the Alabama Onsite Wastewater Board (AOWB). License types include Basic, Advanced Level I and II installers, a Manufacturer's License, and a Pumper's License.

How often should a septic tank be pumped in Alabama?

The Alabama Department of Public Health recommends pumping the tank every three to five years to prevent sludge build-up. Inspection every one to three years is advised, though these are recommendations rather than legal requirements.

Get free quotes