Find your city

Type your city or ZIP code to see the best-rated septic service companies near you.

Get free quotes

Plastic vs Concrete Septic Tanks: Pros, Cons and Durability

Updated November 17, 2026

Aerial view of rows of concrete and plastic pipes and tanks laid out on sand at a construction site

If you are choosing between a plastic and a concrete septic tank, the short answer is that concrete offers more mass and a proven track record, while plastic offers corrosion resistance and easier handling. Neither material is automatically better; the right choice depends on your water table, soil, access and budget.

This guide walks through how each material behaves over time, where each one tends to fail, and what installation and maintenance look like for a homeowner. Use it as a starting point, then confirm local requirements with your county health department or the state pages listed below.

Key takeaways
  • Concrete is heavy, strong and stable, but can crack from ground movement or hydrogen sulfide corrosion over decades.
  • Plastic does not rust or corrode, but a empty tank can float in a high water table if it is not anchored.
  • Typical national installation costs run about $3,500 to $12,000, so compare full installed price, not just the tank.
  • Pumping still matters: most tanks are pumped every 3 to 5 years, regardless of material.

Quick Comparison Table

Before reading the details, it helps to see how the two materials stack up on the factors homeowners ask about most. The table below summarizes typical behavior; actual performance depends on installation quality, soil and how the system is maintained.

Use this table as a checklist to decide which questions matter most for your property, then read the sections that follow for the reasoning behind each point.

  • Weight: concrete is very heavy and resists floating; plastic is light and easy to handle.
  • Corrosion: concrete can be attacked by sulfide gas over time; plastic does not corrode.
  • Cracking: concrete can crack under ground pressure or shifting soil; plastic can crack if poorly supported but generally flexes more.
  • Buoyancy: plastic tanks may float if groundwater rises and the tank is empty; concrete usually stays put.
  • Typical lifespan: many concrete tanks last decades, and a well-maintained system can reach about 30 years; plastic tanks vary by brand and installation.
  • Installation: plastic usually requires less equipment; concrete often needs a crane or large machinery.

Concrete Tanks: Strength, Weight and Cracking

Concrete has been the traditional septic tank material for decades, and many older systems in the United States are still working well. Its main advantages are mass and rigidity. A full concrete tank is very heavy, so it stays where it was set and resists the uplift that can move lighter tanks in wet ground.

The weak point of concrete is cracking. Tanks can crack from settling soil, freeze and thaw cycles, heavy vehicles driving over the lid, or improper backfill. Over long periods, the gases produced in a septic tank can also corrode concrete surfaces, which is why inspectors look for worn walls and exposed reinforcing steel during routine checks.

A small hairline crack may not cause immediate trouble, but any leak lets wastewater reach the surrounding soil. If you suspect cracks, have a licensed professional inspect the tank and recommend a repair or replacement rather than sealing it yourself.

  • Strength: very rigid and stable once set.
  • Weight: heavy enough to resist floating in most conditions.
  • Risks: cracking, sulfide corrosion over time, and damage from heavy loads on the lid.
  • Repairs: possible in some cases, but a professional should evaluate them.
Need a septic service company?

Compare the best-rated septic service companies near you, with reviews and services.

Plastic Tanks: Light, Corrosion-Proof, but Buoyant

Plastic, usually polyethylene or fiberglass-reinforced polymer, has become a common choice because it does not rust or corrode from septic gases. Plastic tanks are also much lighter, which makes them easier to move and set, and they often require less heavy equipment on site.

The trade-off is buoyancy. An empty plastic tank has less weight holding it down, so in a high water table or during heavy rain, groundwater can push it upward. Installers address this with proper bedding, anchoring straps, or by setting the tank in a way that keeps it from lifting. Ask any installer how they plan to anchor the tank before work begins.

Plastic can also be damaged by point loads or improper backfill if it is not supported evenly. Following the manufacturer's installation instructions is essential, because a plastic tank that shifts or flexes too much can leak at its seams or fittings.

  • Corrosion: not affected by septic gases.
  • Weight: light, so easier to handle and install.
  • Buoyancy: can float if empty and groundwater is high, so anchoring matters.
  • Support: needs even bedding and correct backfill to avoid flexing or damage.

Lifespan and Durability Compared

Lifespan depends far more on maintenance than on the tank material alone. A system with regular pumping and inspections can last a long time whichever material you choose. The EPA recommends pumping the tank every 3 to 5 years and inspecting it every 1 to 3 years, and many well-kept systems reach about 30 years of service.

Concrete tanks tend to be judged on their structural life, which can be long if they are not cracked or corroded. Plastic tanks are valued for avoiding corrosion, though their long-term performance depends on the quality of the product and how well they were installed. Ask the installer or manufacturer for their documentation on expected service life.

Whatever you choose, keep records of pumping, inspections and any repairs. Those records help future buyers and service providers understand the system's condition.

  • Pump the tank every 3 to 5 years (EPA guidance).
  • Inspect the tank every 1 to 3 years, and inspect aerobic or mechanical systems annually.
  • Heavy household water use can shorten the pumping interval.
  • Keep written records of service for future reference.

Cost and Installation Differences

Typical national installation costs for a septic tank range from $3,500 to $12,000, with an average near $7,500. Those figures cover the whole project, not just the tank, so material is only one part of the price. Replacement projects typically run $3,000 to $10,000, averaging about $6,500.

Concrete tanks are often more expensive to deliver and set because of their weight, and they may require a crane or heavy truck. Plastic tanks are lighter and can sometimes be installed with less equipment, but they may need added anchoring or bedding, which adds labor. Compare written estimates that list delivery, excavation, anchoring, backfill and inspection separately.

Ongoing costs matter too. Typical pumping runs about $290 to $565, with an average near $430. Annualized over a three-year pumping cycle, that is roughly $143 per year. Those maintenance costs apply regardless of which tank material you choose.

  • Typical national installation: $3,500 to $12,000.
  • Typical national replacement: $3,000 to $10,000.
  • Typical pumping: $290 to $565 every few years.
  • Ask each installer for an itemized estimate including anchoring and backfill.

Which Is Better for High Water Tables and Tough Soils

If your property has a high water table, shallow bedrock or soil that moves a lot, the material decision becomes more important. In a high water table, a light plastic tank that sits empty can be at risk of floating, so anchoring and proper backfill are essential. Concrete's weight gives it an advantage in this situation, though it still needs a sound base.

In rocky or uneven ground, both materials need careful bedding so the tank sits evenly. Concrete can crack if it is not supported well, and plastic can deform if the load is uneven. A licensed installer who knows local soil conditions is worth paying for in these cases, and a percolation test and site evaluation can help determine suitable designs.

Remember that local health departments set design and installation rules, and requirements for high water tables or difficult soils vary. Check your state's guidance through the all states (laws and companies by state) page before you finalize a plan.

  • High water table: concrete's weight helps, and plastic needs firm anchoring.
  • Rocky or uneven ground: both need even bedding and professional installation.
  • Heavy soil movement: watch for cracking in concrete and flexing in plastic.
  • Always confirm local rules with the health department.

Which Material Fits Your Site: A Decision Checklist

Making the final choice is easier when you work through a short list of site-specific questions. Start with your water table and soil, then consider access for equipment, your budget and how long you plan to stay in the home. No single material wins in every situation, so match the tank to the conditions on your lot.

Once you have answers, get written quotes from at least two licensed installers and ask them to explain how they will handle anchoring, backfill and inspection. If you are not sure where your existing tank sits or how it was built, the guide on how to find your septic tank safely can help you locate it without digging blindly.

Never enter a septic tank or handle sewage without protection. Gases can be dangerous, and any repair or inspection of the interior should be done by a licensed professional. To find local help, start with a search for a septic service company near you.

  • Is your water table high or does the lot flood? Lean toward concrete or plan strong anchoring for plastic.
  • Is equipment access limited? Lighter plastic tanks may be easier to install.
  • What is your budget for the full installed system, not just the tank?
  • Does a local installer have experience with your soil and the material you prefer?
  • Have you confirmed permit and design requirements with your county or state?

Frequently asked questions

Can I use a plastic septic tank?

In many areas, yes. Plastic tanks are widely used because they resist corrosion and are lighter to install. Whether a specific plastic tank is allowed depends on local health department rules and the tank's certification. Check with your county and the state guidance before you buy, and make sure the installer plans to anchor the tank properly in your soil conditions.

What are the disadvantages of plastic septic tanks?

The main drawbacks are buoyancy and support needs. An empty plastic tank can float if the water table is high, so it needs anchoring and correct bedding. Plastic can also flex or deform if the load is uneven or the backfill is poor. Installation quality matters a great deal, so choose an experienced installer and follow the manufacturer's instructions closely.

Can you put concrete over a septic tank?

Usually not directly. Heavy loads such as vehicles can crack the lid and damage the tank, and access for pumping and inspection must stay clear. Before building or paving over any part of the system, check with your local health department and your installer. They can tell you what loads the tank is designed for and where access risers should be located.

Should I get a concrete or plastic septic tank?

It depends on your site. Concrete suits sites where weight helps resist floating, and plastic suits sites where corrosion resistance and easy handling matter more. Compare written estimates for the full installed system, consider your water table and soil, and confirm local design rules. A licensed installer familiar with your area can recommend the best fit for your property.

Get free quotes